广东晟一智能科技有限公司
Guangdong SUNYI Intelligent Technology Co., Ltd.
How should the winding machine die out of control? Out of control of winding machine die frame is a relatively difficult problem. If it can not be solved in time, it will do great harm to the stability of users' production and equipment, and seriously affect the work efficiency of personnel. In the case of such a difficult situation, it needs to be solved quickly.
So the die frame is out of control, how to make a quick solution to ensure the smooth operation of the packaging work? The following McGonagall will give you the reason for the runaway of the winding machine mold frame and the corresponding solutions.
1. it may be inappropriate for you to break out of the photoelectric time - you need to reset the optoelectronic disengagement time until the right place.
2. the ambient light is too strong to affect the photoelectric switch, making it lost - you just need to add a sunshade for the photoelectric switch.
3., the photoelectric switch always has output. You can see if the photoelectric switch is in this state. If it is, it may be the sensitive adjustment of the photoelectric switch is not suitable, or the photoelectric switch is damaged, so you need to replace the new photoelectric switch.
It is inevitable for the winding machine to operate in a long time. The key is to solve it in time of failure. It is very necessary for operators to know more about faults and corresponding solutions.